Blog_list-Concrete Batching Plant,Concrete Mixers,Ready mix Concrete Plant

What is the specific operation process of putty powder production line

Home

2024/05/29

Jaw crusher is mainly used for the crushing of all kinds of large materials, because the jaw crusher is more suitable for talc crushing processing with the advantages of high efficiency, uniform discharge, safety and reliability.

Treatment of Construction Technology Base of Gypsum Mortar Production Line

2024/05/29

During plastering, the wall surface shall be leveled with mortar plate and trowel, and the standard rod shall be tightened with H-shaped ruler or scraper, scraped tightly and pressed tightly to make the wall surface straight.

What are the advantages of gypsum mortar spraying machine characteristics?

2024/05/29

A gypsum mortar spraying machine can easily spray 150 ㎡ per hour, even if it works 8 hours a day, it can also spray more than 1000 ㎡. Compared with manual work, the work efficiency has improved by more than a little. And the use of gypsum mortar spraying machine construction, there is no floor ash, more clean, save material.

How to improve the performance of dry mortar production line with less cost

2024/05/29

We choose DT05 dry mortar production line and DT08 dry mortar production line as the key dry mortar production line, and set the key parts of DT05 dry mortar production line as the energy head and DT08 dry mortar production line as the cutter.

These problems can be solved by real stone paint equipment.

2024/05/29

First, the noise is loud when mixing, which may be caused by foreign matter entering the mixer. Second, if it is a loud noise during idling. In this case, it is necessary to check whether the lubricating oil on the bearing is sufficient. Bearing friction due to insufficient lubrication. The inspection of lubricants should be strengthened. Third, check whether the agitator is deformed due to severe friction with the cylinder wall.

Advantages of dry mortar production line

2024/05/29

According to the different types of mortar, it is divided into: special mortar equipment and ordinary mortar equipment. The average annual output of ordinary dry mortar is hundreds of thousands of tons, and the annual output of special mortar production line also exceeds tens of thousands of tons.

How to choose suitable dry-mix mortar equipment?

2024/05/29

Depending on the type of mortar, it can be divided into: special mortar equipment and ordinary mortar equipment. The average annual output of ordinary dry-mixed mortar is hundreds of thousands of tons, and the annual output of special mortar production lines also exceeds tens of thousands of tons.

Gypsum mortar spraying machine: necessary equipment to improve construction efficiency

2024/05/29

The traditional construction method requires a large amount of mortar to apply, and the spraying machine can evenly spray the mortar on the wall, reducing the waste of mortar. This not only saves costs, but also reduces environmental pollution.

Congratulations on the official launch of the website of Qingdao anlitt machinery equipment co., ltd.

2024/05/29

If you need our products and services, please feel free to contact us, our staff will be happy to serve you.

Performance characteristics of a biaxial zero-gravity dry powder mortar mixer

2024/05/29

Materials with significant differences in bulk density and particle size do not exhibit stratification or segregation during mixing.